локтайт 542

Loctite 542

Loctite 542 is designed for locking and sealing metal pipes, fittings, and other cylindrical metal components. When sealed in an airtight environment, the product cures between closely fitting metal surfaces, preventing loosening and leakage caused by shock and vibration. Loctite 542 exhibits thixotropic properties, which reduces the migration of liquid products after application to components.

Breakaway torque, Steel, M10:15.0 N·m (130.0 in./lb.)
Color:Brown
Рабочая температура: от -55,0 °C до 150,0 °C (от -65,0 °F до 300,0 °F)
Viscosity, 20 RPM:600.0 mPa·s (cP)

 

Обзор продукта

LOCTITE 542 is a single-component, thixotropic, medium-strength anaerobic thread sealant developed for locking and sealing fine-threaded metal pipes and fittings commonly used in hydraulic and pneumatic systems. It cures rapidly when confined between metal surfaces, preventing vibration loosening and leakage. It contains no particles or fillers, avoiding contamination of fluid systems and clogging of fine filters.

Основные характеристики и преимущества

  • Fast cure on fine threads (instant low-pressure seal)

  • Medium strength—secure yet serviceable

  • Thixotropic formula that resists migration after application

  • Resistant to fuel, oil, hydraulic fluids, and coolants

  • Filler-free—won’t clog filters or valves

  • Approvals and certifications (e.g. DVGW, WRAS) for certain markets

Технические характеристики

НедвижимостьЗначение / диапазон
ЦветBrown
Вязкость~600 мПа·с (сП)
Operating Temperatureот –55 °C до +150 °C
Breakaway Torque (Steel, M10)15.0 N·m (≈ 130 in·lb)
Тип леченияAnaerobic, one component
Thixotropic BehaviorReduces migration / bleeding
Filler ContentНет

Инструкции по применению / использованию

  1. Подготовка поверхности — Clean threads thoroughly to remove oil, dirt, and contaminants.

  2. Apply Adhesive — Use a 360° bead on male threads, leaving the first thread free; alternatively apply to female threads when appropriate.

  3. Сборка — Tighten to recommended torque; adhesive spreads into micro-gaps.

  4. Curing / Handling — Provides instant low-pressure seal; full cure depends on substrate, thread size, and temperature.

  5. Разборка — Some service is possible with standard hand tools; use heat if necessary.

Include tips such as: avoid over-application, allow cure before pressure, consider activator for slow-curing conditions.

Типичные области применения

LOCTITE 542 is ideal for:

  • Fine-threaded hydraulic and pneumatic fittings

  • Metal pipe fittings in fluid power systems

  • Valves and small metal connectors

  • Any application where sealing and locking of metal threads is needed without inert particles

Часто задаваемые вопросы

  • Q1: Can LOCTITE 542 be used on stainless steel or plated threads?
    A1: Yes — it cures between metal surfaces even on passive substrates, though cure may be slower in some cases.

  • Q2: Does it contain particles or fillers that might clog system filters?
    A2: No — it is filler-free, so it won’t clog valves or fine filters.

  • Q3: What is its temperature range?
    A3: –55 °C to +150 °C.

  • Q4: What is the breakaway torque on steel (M10)?
    A4: Approximately 15 N·m.

  • Q5: Is heat needed to disassemble?
    A5: Often parts can be disassembled with tools; if seized, localized heat may help.

Похожие товары